.jpg)
high efficiency dryer
Description
The efficient & energy saving dryer is mainly used for drying the materials with specified granularity and humidity. Having the strong adaptability it
can be applied for various materials with its reliable and convenient operation. The machine is composed mainly by rotary part, lifting plates,
transmission unit, support device and sealing ring. This dryer, manufactured by Y.H. Heavy has advantages of reasonable structure, elaborate
manufacturing, big capacity, low energy consumption and easy handling etc.
Volume of drum:9.0-285m3
Capacity：1.9-76t/h
Application: Various industries of ore grading, construction materials, metallurgy, chemical industry and foods etc.
Suitable materials: slag, limestone, coal powder, coal mud, lignite, clay and bauxite etc.
立即訂購
產(chǎn)品特點
1、 Advanced technology adopted to reduce the dust removal load
The novel feeding and discharging devices are adopted to avoid the blocking, non-continuity, non-uniformity and reverting of materials
of the drum dryer and reduce therefore the working load of dust removal system.
2,、 Concurrent flow drying method, high thermal efficiency
The concurrent flow drying method is applied for the dryer made by Y.H.Heavy. The flue gas and wet materials are fed into the dryer
from the same side. The high evaporation intensity can be obtained by high temperature of flue gas. The exit temperature of dryer is low with
the performed heat efficiency.
3,、 Low wear rate, steady running
The “zero horizontal thrust” has been achieved by the dryer reducing greatly the wear of thrust shaft to ensure the steady running of the
dryer. The “ centering type support roller” is adopted to have always the lineal contact between support roller and tire in order to decrease the
wear and power consumption maximum.
4,、High automation extent, convenient operation
The running parameters which are changed as per nature of materials will make the materials forming a stable full section materials curtain
in the dryer to get the heat exchange more fully. And the moisture index can be easily adjusted on basis of customer requirement.
5、 Anti-overload ability, low drying cost
The dryer is featured by its strong anti-overload ability, big handing capacity, low consumption of combustibles and low drying cost.
工作原理
spiral progressive type to make the heat exchanges. Then the materials move to the another side of inner drum to be ready to enter
into the middle drum in order to have the counter-current drying. In the middle drum, the materials are constantly lifted and move forward in type
of “two steps advance & one step back”, there the materials absorb not only the heat dissipated from the inner drum, but also the heat from the
middle drum, as so the drying time is prolonged and the optimal drying conditions can be obtained.
Then the materials move to the another end of the middle drum and fall down on the outer drum. In the outer drum, the materials move forwards
in “rectangular & multi loop mode”. The materials which achieve the drying effect fast march and discharge out under the action of hot air; and
the other ones which don’t achieve the drying effect (rather wet) can’t march fast due to the gravity, thus these materials must be dried fully in the
rectangular lifting plates to complete the drying process.
技術(shù)參數(shù)
|
Type（mm） |
Inclination（%) |
Inlet temperature（℃） |
Rotary speed（r/min） |
Power（kw） |
Capacity（t/h） |
Weight（t） |
|
Ф600x6000 |
3-5 |
≤700 |
3-8 |
3 |
0.5-1.5 |
2.9 |
|
Ф800x8000 |
3-5 |
≤700 |
3-8 |
4 |
0.8-2.0 |
3.5 |
|
Ф800x10000 |
3-5 |
≤700 |
3-8 |
4 |
0.8-2.5 |
4.5 |
|
Ф1000x10000 |
3-5 |
≤700 |
3-8 |
5.5 |
1.0-3.5 |
5.6 |
|
Ф1200x10000 |
3-5 |
≤700 |
3-8 |
7.5 |
1.8-5 |
14.5 |
|
Ф1200x12000 |
3-5 |
≤700 |
3-8 |
11 |
2-6 |
14.8 |
|
Ф1500x12000 |
3-5 |
≤800 |
2-6 |
15 |
3.5-9 |
17.8 |
|
Ф1800x12000 |
3-5 |
≤800 |
2-6 |
18 |
5-12 |
25 |
|
Ф2200x12000 |
3-5 |
≤800 |
1.5-6 |
18.5 |
6-15 |
33 |
|
Ф2200x18000 |
3-5 |
≤800 |
1.5-6 |
22 |
10-18 |
53.8 |
|
Ф2200x20000 |
3-5 |
≤800 |
1.5-6 |
30 |
12-20 |
56 |
|
Ф2400x20000 |
3-5 |
≤800 |
1.5-5 |
37 |
18-30 |
60 |
|
Ф3000x20000 |
3-5 |
≤800 |
1.5-5 |
55 |
25-35 |
78 |
|
Ф3000x25000 |
3-5 |
≤800 |
1.5-5 |
75 |
32-40 |
104.9 |
應用案例
其他產(chǎn)品
-
high efficiency dryer -
drum dryer -
rotary drum dryer -
rotary dryer